Skip to content

01A RP01A: Cooling and temperature: what a bench test will not show

Operating temperature, cooling method and fan header show no difference on a prototype, but surface together in the first summer after delivery.

Specifications first: 01A RP01A

Item Specification
Cooling passive cooling(supportsfancooling)
Operating temp. -20 to 60 C
Power budget 10W(excluding peripherals)
SoC RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz
Memory LPDDR5X; 4G/8G/16G/32Goptional
Storage supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional)
USB USB3.1 host Type-A x 1 5 Gbps; USB3.1 OTG Type-C x 1 5 Gbps; USB2.0 host Type-A x 1 480 Mbps
Display HDMI 2.1port x1, up to8K 60Hz, HDCP2.3; Type-Cport x1, 2Lane, up to4K 60Hz, DP1.4a HDCP2.3; MIPI DSI x 2, 4Lane

How to read these numbers

Cooling is passive cooling(supportsfancooling). Passive is quiet with little headroom; sustained load or heat needs an active option reserved.

Operating temperature is -20 to 60 C, an ambient range; sealed enclosures still need a separate junction-temperature review.

System power is rated 10W(excluding peripherals), excluding peripherals. Devices and add-in cards draw from the remaining headroom.

The SoC is RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz. The chip sets the CPU architecture, instruction set and supported OS; confirm compatibility with your software stack first.

Memory is configured as LPDDR5X; 4G/8G/16G/32Goptional. It bounds application and UI size; pick the tier against the real workload before volume orders.

Storage is supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional). The type (eMMC / UFS / SD) matters more than capacity for boot speed and random I/O.

USB is configured as USB3.1 host Type-A x 1 5 Gbps; USB3.1 OTG Type-C x 1 5 Gbps; USB2.0 host Type-A x 1 480 Mbps. Read count and speed together: speed decides which devices work, count decides how many at once.

Display output is HDMI 2.1port x1, up to8K 60Hz, HDCP2.3; Type-Cport x1, 2Lane, up to4K 60Hz, DP1.4a HDCP2.3; MIPI DSI x 2, 4Lane. Check resolution, refresh rate and interface type together, especially for a specific panel.

What it means in practice

Operating temperature tops out at 60 C. That is ambient, not junction temperature; an enclosure and airflow design have to hold the junction down.

Cooling is passive with no fan header. Constrained enclosures doing sustained decode need a thermal review, or a board with a fan header.

There is a fan header for active cooling. In sealed enclosures or hot environments, this matters more to stability than headline compute.

Read it against neighbouring specs

One more angle that is easy to miss: Power budget does not work in isolation. It interacts with Power input and Fan. Read them together to see whether the board will hold up in your configuration.

System power is rated 10W(excluding peripherals), excluding peripherals. Devices and add-in cards draw from the remaining headroom.

Power input is 12V 2A powerDC barrel jack 5.5 2.0. Voltage and connector shape drive baseboard design and field supply replacement.

Fan header: Fan x 1 12V Fan/5V Fan 1.25mm 3P. Only a header with PWM and tach can do temperature-controlled speed.

Where it fits

Fits indoor deployment at normal temperature with airflow; hot floors, outdoor cabinets and sealed devices need thermal design first.

When not to choose it

Before putting a normal-temperature board in an unconditioned shop or outdoor cabinet, run a system thermal review; do not treat the board rating as the answer.

Check these before ordering

  • Peak ambient temperature and airflow at the site
  • Whether cooling is enough at full load
  • Whether a sealed enclosure needs a fan or heat-spreading structure

Full specs, interface definitions and flashing notes are on the matching page at https://docs.haimika.com/en. To map the numbers to a concrete configuration, submit your requirements at https://www.haimika.com/en/quote/ and we will check interfaces, power and storage against your list.

Talk to an engineer

Need selection advice, samples or a volume quote?

Tell us your scenario and target volume — you will get selection advice, lead time and pricing within one business day.

  • Free selection & feasibility review
  • Sample / evaluation board support
  • ODM / OEM customization