01A RP01A: NPU: what models it can and cannot run
A TOPS figure alone does not say whether it fits. Read it with precision and model size to see which workloads it suits.
Specifications first: 01A RP01A
| Item | Specification |
|---|---|
| NPU | 6.0 Tops |
| SoC | RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz |
| Memory | LPDDR5X; 4G/8G/16G/32Goptional |
| Storage | supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional) |
| USB | USB3.1 host Type-A x 1 5 Gbps; USB3.1 OTG Type-C x 1 5 Gbps; USB2.0 host Type-A x 1 480 Mbps |
| Display | HDMI 2.1port x1, up to8K 60Hz, HDCP2.3; Type-Cport x1, 2Lane, up to4K 60Hz, DP1.4a HDCP2.3; MIPI DSI x 2, 4Lane |
| Ethernet | 1000M x 1 |
| Power input | 12V 2A powerDC barrel jack 5.5 2.0 |
How to read these numbers
The NPU is rated 6.0 Tops. That figure is measured at a specific precision; judge model support with the precision in mind.
The SoC is RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz. The chip sets the CPU architecture, instruction set and supported OS; confirm compatibility with your software stack first.
Memory is configured as LPDDR5X; 4G/8G/16G/32Goptional. It bounds application and UI size; pick the tier against the real workload before volume orders.
Storage is supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional). The type (eMMC / UFS / SD) matters more than capacity for boot speed and random I/O.
USB is configured as USB3.1 host Type-A x 1 5 Gbps; USB3.1 OTG Type-C x 1 5 Gbps; USB2.0 host Type-A x 1 480 Mbps. Read count and speed together: speed decides which devices work, count decides how many at once.
Display output is HDMI 2.1port x1, up to8K 60Hz, HDCP2.3; Type-Cport x1, 2Lane, up to4K 60Hz, DP1.4a HDCP2.3; MIPI DSI x 2, 4Lane. Check resolution, refresh rate and interface type together, especially for a specific panel.
Wired networking is 1000M x 1. Port count decides whether isolation or redundancy is possible; speed sets the LAN ceiling.
Power input is 12V 2A powerDC barrel jack 5.5 2.0. Voltage and connector shape drive baseboard design and field supply replacement.
What it means in practice
The NPU is 6.0 TOPS INT8, enough for lightweight vision models such as detection, barcode and person recognition. Treating it as big-model capable is a common selection error.
Read it against neighbouring specs
One more angle that is easy to miss: Memory does not work in isolation. It interacts with Power input and Power budget. Read them together to see whether the board will hold up in your configuration.
Memory is configured as LPDDR5X; 4G/8G/16G/32Goptional. It bounds application and UI size; pick the tier against the real workload before volume orders.
Power input is 12V 2A powerDC barrel jack 5.5 2.0. Voltage and connector shape drive baseboard design and field supply replacement.
System power is rated 10W(excluding peripherals), excluding peripherals. Devices and add-in cards draw from the remaining headroom.
Camera interface is MIPI CSI 4Lane x 2. MIPI CSI lane count decides how many cameras and what resolution.
Where it fits
Fits lightweight vision inference such as detection, recognition and classification; large models or multi-stream HD analysis need a higher-compute platform.
When not to choose it
Treating a few-TOPS NPU as a large-language-model runner is a common error; for 7B-class models, pair the host with a dedicated AI module.
Check these before ordering
- The model, precision and input resolution
- Whether NPU compute matches memory bandwidth for the model
- Whether quantized accuracy and speed are acceptable
All figures above come from the hardware spec pages at https://docs.haimika.com/en. If your project has hard limits on port count, power or cooling, send the requirements through https://www.haimika.com/en/quote/ and we will check them model by model before deciding.


