01A RP01A: Memory sizing: 2 GB or 16 GB
Memory options look like a cost question but are a workload question. The OS, UI size and local caching decide which tier to order.
Specifications first: 01A RP01A
| Item | Specification |
|---|---|
| Memory | LPDDR5X; 4G/8G/16G/32Goptional |
| SoC | RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz |
| Storage | supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional) |
| USB | USB3.1 host Type-A x 1 5 Gbps; USB3.1 OTG Type-C x 1 5 Gbps; USB2.0 host Type-A x 1 480 Mbps |
| Display | HDMI 2.1port x1, up to8K 60Hz, HDCP2.3; Type-Cport x1, 2Lane, up to4K 60Hz, DP1.4a HDCP2.3; MIPI DSI x 2, 4Lane |
| Ethernet | 1000M x 1 |
| Power input | 12V 2A powerDC barrel jack 5.5 2.0 |
| Power budget | 10W(excluding peripherals) |
How to read these numbers
Memory is configured as LPDDR5X; 4G/8G/16G/32Goptional. It bounds application and UI size; pick the tier against the real workload before volume orders.
The SoC is RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz. The chip sets the CPU architecture, instruction set and supported OS; confirm compatibility with your software stack first.
Storage is supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional). The type (eMMC / UFS / SD) matters more than capacity for boot speed and random I/O.
USB is configured as USB3.1 host Type-A x 1 5 Gbps; USB3.1 OTG Type-C x 1 5 Gbps; USB2.0 host Type-A x 1 480 Mbps. Read count and speed together: speed decides which devices work, count decides how many at once.
Display output is HDMI 2.1port x1, up to8K 60Hz, HDCP2.3; Type-Cport x1, 2Lane, up to4K 60Hz, DP1.4a HDCP2.3; MIPI DSI x 2, 4Lane. Check resolution, refresh rate and interface type together, especially for a specific panel.
Wired networking is 1000M x 1. Port count decides whether isolation or redundancy is possible; speed sets the LAN ceiling.
Power input is 12V 2A powerDC barrel jack 5.5 2.0. Voltage and connector shape drive baseboard design and field supply replacement.
System power is rated 10W(excluding peripherals), excluding peripherals. Devices and add-in cards draw from the remaining headroom.
What it means in practice
Memory is offered in 4G/8G/16G/32G. Two to four GB suits light systems and apps; large UI, multitasking or local models are safer at the top end.
Read it against neighbouring specs
One more angle that is easy to miss: Storage does not work in isolation. It interacts with OS and NPU. Read them together to see whether the board will hold up in your configuration.
Storage is supports eMMC5.1, SDIO3.0; 16GB/32GB/64G/128G(optional). The type (eMMC / UFS / SD) matters more than capacity for boot speed and random I/O.
The OS options are Android /Debian /Buildroot/ Ubuntu. Support range decides whether it fits your existing operations and software stack; confirm a stable image exists for your target OS.
The NPU is rated 6.0 Tops. That figure is measured at a specific precision; judge model support with the precision in mind.
The SoC is RK3588S Octo-core, Cortex-A76 and Cortex-A55; up to2.4 GHz. The chip sets the CPU architecture, instruction set and supported OS; confirm compatibility with your software stack first.
Where it fits
Fits projects with a known load that can size memory by tier; heavy UI or multitasking is safer at the top tier.
When not to choose it
Ordering the smallest memory and upgrading later usually means replacing the whole board; estimate at the upper end up front.
Check these before ordering
- Actual memory footprint of the OS and apps
- Whether local caching or a large model is needed
- Which tier to order for production
To confirm whether a particular port or power detail fits your device, the specifications and downloads are at https://docs.haimika.com/en. You can also describe your peripherals and scenario at https://www.haimika.com/en/quote/, and we will reply with feasibility and boundaries.


