RK3528 vs RK3566: Choosing Between Two Entry-Level Staples
CPU, GPU, NPU and peripherals compared — with separate conclusions for the TV-box and router directions.
标签：Rockchip
阅读全文 →
RK3576 Selection Guide: One Table to Decide If It’s Enough
Compute, interfaces, cost and ecosystem in one matrix — with clear yes/no calls for 12 common scenarios.
When RK3576 Is Enough: Not Every Project Needs an RK3588
Performance, interfaces and cost in a triangle — the sweet-spot scenarios for RK3576 and how to decide.
2026 ARM Edge Computing: Four Trends Reshaping the Landscape
NPU democratization, a maturing software stack, RISC-V flanking and energy efficiency as the #1 procurement metric — four structural shifts in edge computing.
Production Firmware Flashing: Consistency and Line Preparation From Sample to Batch
A working sample and a working production run are different things. The first needs one unit to work; the second needs every unit to work identically. Between them s…
Embedded Device Power Budgeting: How to Size It So the Field Does Not Bite
Power problems in embedded projects have a signature: they never appear in the lab and always appear in the field. The reason is simple — the lab has short leads, an…
NAS Bay and RAID Planning: Trading Off Capacity, Redundancy and Rebuild Time
Before buying a NAS, the question to settle is not “how much capacity” but how much loss you can absorb and how long you can wait. Bay count, RAID level and per-disk…
Embedded Box Field Troubleshooting: A Diagnostic Order for No Boot, No Display, Lost Network and Reboot Loops
When a device fails in the field, the most expensive part is rarely the repair — it is the time spent locating the fault. The same complaint, “it will not boot,” may…
Energy Monitoring Gateway Selection: Serial Ports, Networking and Edge Compute
In energy management, power monitoring and consumption data acquisition, the gateway plays an unglamorous but critical role: it talks downwards to meters and devices…
Industrial Vision Inspection Terminals: Cameras, Compute and Line Integration
Treating a vision inspection terminal as “a computer that runs a model” is the most common misunderstanding in these projects. A vision system on a production line i…